Bar strap for the ROPEFLEX RX505 enable easy, fast and secure installation on bars up to 2 inches in diameter.

Easily slide RX505 from center of the pull-up bar or from side to without disconnecting

Lockable carabiner allows for fast mount and dismount of the RX505

Designed for the RX8200 rig each of these durable storage pins can hold over 150LB of bumper or cast-iron plates. Simple mount each post on the side of the RX8200 using included hardware. In addition, a specially designed detent feature prevents plates from sliding off the pin. Use multiple storage posts to save space and to allow for quick bar loading and unloading on bench press and squat stations of the RX8200 rig.

This optional bracket for the RX2100 enables enhanced installation on concrete wall or steel and wooden uprights.

Install the bracket in the desired location and then lift and mount the RX2100 with included hardware.

RX505 J-HOOK style bracket. One-piece steel design incorporates a 0.625" diameter center load pin and includes adapter to accommodate up to 1" rack post hole. Adjustable inner plates can accommodate posts from 2 to 3 inches in width. This quick connect bracket comes with a spring loaded pull pin that secures the RX505 endless rope trainer to an upright metal post.

The RX505 Rope Training Drum quick release anchoring system for adjustability and mobility

Install RX05 with TRAX in multiple positions, rooms or inside and out!

INCLUDES: 2 Mounting TRAX, 1 RX505 TRAX adapter plate and hardware for wooden stud installation

For additional protection outdoor

Made from marine grade outdoor canvas for RX505 RX2100OX2O RX5500

Our handmade ropes are of the highest quality polyester material, same material we use on our endless rope trainers. Proudly made from start to finish at our California factory we hand stitch our ropes and pre-condition them for long-life using our proprietary process. In addition to rope color, weight and length choices we can incorporate custom logos on genuine leather handles and protective sheaths.

This barbell hook set features simple rattle free solid steel construction. Low and high positions are 7.75 inches apart to accommodate different arm lengths. Each hook plate attaches to the RX8200 series rack using five 3/8" screws and can hold up to 1,000 lbs per set.

Adjustable pulley system for the RX2100 that can be attached to a wall or post

Adds multitude of exercises with horizontal and bottom-up pulls

7 inch | 17 cm Double ball bearing design for smooth operation

RX8200 Vertical Bar holder System
Set of 2 (left and right) single-bar storage accessory for the RX8200 Rig is made in the USA from 0.25" thick steel and a round sleeve. Protective HDPM lining protects from damage and minimizes any harsh contact with the bar's collar during insertion.
Please Note: This accessory is NOT recommended for use with specialty bars.

Secure your HIPERVISION iPad Mini Gen 5 (2017 & 2019) in our robust powder coated security enclosure. New Mini iPad enclosures available upon request.

Secure your HIPERVISION phone in our robust all metal powder coated security bracket·. Attach to any surface using included mounting plate.

Optional extension arm designed to accommodate kick and punch bags on the RX8200 rig, providing ultimate functionality, flexibility and stability. Included thrust bearing system ensure smooth and worry-free operation on bags weighing up to 100LBS. This wingspan extension is constructed from heavy-duty 3x3" (inch) tubing with 0.125" (inch) wall thickness and welded to 0.25" (inch) thick plate.

Quick-set (J-Hook style) adjustable pulley for the RX2100 attachable to existing racks

Features safety pull pin with machined aluminum knob to prevent unintentional disengagement

7 inch diameter double-ball bearing design provides smooth operation and adds multitude of exercise with horizontal and bottom up pulls.

Position your HIPERVISION iPhone anywhere on our full metal stand with spring loaded holder. Keep your HIPERVISION phone in our robust all metal powder coated security bracket·.

RX505 Rail installation only kit. Enables installation of the RX505 with rail adapter on walls (through studs), doors, concrete and brick surfaces.
Kit includes:
1. 12 Position Stainless Steel Rail 77 inches long
2. RX505 rail adapter plate with pull pin
3. Rail install extensions with hardware
Note: RX505 must be purchased separately

HIPERVISION will change the way you look at exercise! The system consists of a battery operated bluetooth module and a downloadable app. HIPERVISION can be selected as an option on compatible equipment or purchased as an upgrade at a later time. All ROPEFLEX progressive resistance equipment is designed to work HIPERVISION technology. If exercising was a chore before, you’ll love the way HIPERVISION puts the excitement back into your workouts! Wherever you and your HIPEQ exercise equipment may be, HIPERVISION can instantly transport you from dull monotony to a virtual world of fun and variety, where exercise meets exhilaration.

This groundbreaking new feature offers a simulated environment that responds in real time as you exercise, providing feedback including time, distance, plus other variables, and unparalleled motivation! You’ll never be bored with various adjustable goals to customize each workout to your needs. And that’s not all! HIPERVISION can accommodate multiple ROPEFLEX machines for interactive racing, instruction, or group exercise. Sit side-by-side and race against a friend, or connect to more users, over longer distances, and see how HIPERVISION can redefine your concept of group exercise!

The first wall mounted detachable Landmine post! Lock in the Landmine to any StackTrax Mount with the Locking Pin for a portable, safe, versatile and space saving weight training tool.
Mounting Trax can be installed in a wood stud, concrete, brick, metal post, various racks or our Stack & Portable Stack. Hardware included for wood installs.
FEATURES / BENEFITS:
STACKTRAX CONNECTION: With a simple pull of the pin, the Landmine is releasable so you can adjust heights, location or simply store away. StackTrax Mounting Trax are universal and fit all other StackTrax Fitness attachments.

GETTING YOU SETUP IN NO TIME, NO MATTER WHERE YOU ARE LOCATED!
We handle all facets of your ROPEFLEX installation, from the heavy lifting to the assemblies and electronics.
Our extensive network of installers consists of trained and highly qualified professionals.

Adjustable pulley system for the RX2100, attachable to any existing rack or wall

38” (97 cm) Stainless Steel solid rail with ball bearing pulley and pull-pin mechanism

Adds multitude of exercise with horizontal and bottom up pulls with 8 lockable positions